is here! Shop now, pay later in 4 easy installments
All batteries are click & collect.
Many items are despatched directly from warehouse.
To purchase instore call (09) 274 2727 to check item is in stock
Brand new kit including flywheel and generator stator.
Brand New Aftermarket Stator:
- Direct replacement for the original unit.
- Plug-and-play, direct fit and easy installation.
- Made with high-grade lamination materials.
- High-grade copper winding, resistant to temperatures up to 200°C.
- Connector included.
- Rubber grommet included.
- All products are tested before shipping.
An opposite connector for the main harness side is also included, as these connectors are often melted, corroded or defective and can be a major cause of recurring electrical issues.
Brand New Magneto Flywheel Rotor:
- All products are tested.
All item pictures are accurate. If in doubt, compare the item with the original part.
Before Installing the New Stator:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on the stator and regulator/rectifier.
- Check and repair any melted wiring.
- Use high-temperature dielectric grease on all connectors.
The stator may use a different wire colour code from the original. All wires are installed in the correct order; do not change any wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. Always use locking compound when bolting the stator in place. If the stator includes a pickup coil, ensure the air gap is correct during installation. We recommend setting it as close as possible, but no less than 0.010 inches.
Flywheel Installation:
Before attempting to start the Aprilia, adjusting the air gap is necessary. Rotate the flywheel until the raised node is aligned with the pickup/pulser coil. Adjust the gap as close as possible, but no less than 0.010 inches.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Generator Stator Dimensions:
- Interior diameter: 42 mm
- Exterior diameter: 105 mm
- Thickness: 17 mm
- Length of wires from stator to grommet: 90 mm
- Length of wires from grommet to plug: 300 mm
Stator Specifications:
- Number of wires: 3
- Number of plugs: 1
- Number of pins: 3
Wire-to-Wire Resistance:
- Alternator: Between each White = 0.4 ohms ±20%
Flywheel Dimensions:
- Exterior diameter: 115 mm
- Interior diameter: 108 mm
- Interior diameter of centre housing: 16 mm
- Exterior diameter of centre housing: 24 mm
- Exterior thickness: 30 mm
- Interior thickness: 33 mm